0423 292 151

Our equipment

The right size machine for the site, and all the attachments on the truck.

The question we hear most is "what machines do you have?" Here's the fleet. Tell us what needs doing and how you get onto the site, and we'll pick the machine.

The 6.5-tonne Cat excavator

6.5-tonne excavator

Our biggest excavator, for block walls and anything that needs extra power.

  • Weight: 6,470 kg
  • Reach: 6.58 m
  • Width: 1.98 m
  • Buckets: 600, 450, 300 and ripper
A Cat excavator digging out a front yard for a new build

4-tonne excavator

Almost the same size as the 6.5-tonne, with less reach and power. Better on weight-sensitive ground.

  • Weight: 3,955 kg
  • Reach: 5.35 m
  • Width: 1.95 m
  • Buckets: 600, 450, 300 and ripper
A Cat mini excavator tucked under a veranda

1.8-tonne excavator

Our tight access machine. Small, but powerful, and its tracks pull in to 1 metre wide.

  • Weight: 1,725 kg
  • Width: 1.3 m (1 m with tracks in)
  • Height: 2.3 m
  • Buckets: 600, 450, 300 and ripper
The Cat posi track skid steer with its bucket on a gravel road

4-tonne posi track

A workhorse for clearing sites, moving material and loading. On tracks, so it doesn't bog on loose ground.

  • Weight: 4,076 kg
  • Lift: 3.07 m
  • Attachments: tilt bucket, spreader bar, forks, street sweeper
The tracked mini dumper squeezing down a narrow side path

Cormidi C85 mini dumper

Carries up to 800 kg through confined spaces, over rough ground and up slopes.

  • Carries: 800 kg
  • Width: 0.8 m
  • Tips up to 1.45 m
An Anywhere Excavations tipper truck

Tippers

Our own tippers take the spoil away. The biggest carries 8 tonnes, so there are fewer runs to the tip.

  • Five tipper trucks
  • Biggest: 8 tonnes
A rock auger lifted against the sky

Attachments

Augers, genuine Cat rock hammers, hydraulic and articulated claws, and block grabs, carried on the truck instead of hired in.

  • Augers: 300 to 750 mm
  • Hammers: Cat C6 and C4
  • Block grabs for sandstone

How a job runs

From the first photo of your site to the last load out the gate.

  1. Call or send photosRing us, or send a few photos of the site and the way in through the form.
  2. We look at the siteWe check the access, the ground and what's around it, and give you a quote.
  3. The right machineMatched to the job and the gap it has to fit through, from a mini to the 6.5 tonne.
  4. Dig, build and cart awayExcavators, the skid steer and the tippers work together, so spoil goes as we go.
  5. Cleaned up on the way outRubbish gone and the site left tidy.

Not sure which machine?

Tell us what needs doing and how you get onto the site. Photos of the access help. We'll be in touch to arrange a look.

Rather talk? Give us a call0423 292 151
5.0 from 22 Google reviews

What do you need?

Tell us about the job

Where can we reach you?